Construction & backsheet
Join the outer nonwoven to the barrier film and assemble the chassis. Controlled bonding keeps layers aligned while preserving the intended softness.
HYGIENE / HOTMELT ADHESIVES
Every layer.
A purpose.
Hotmelt bonding for diaper construction, elastic attachment, absorbent cores, feminine-care positioning and wet-wipe lid attachment.
Explore bonding areas
One article.
Different bonding jobs.
Explore three interfaces within a diaper construction. Each needs its own adhesive selection and finished-article checks.
Schematic detail · layers and bond zones enlarged for clarity
Keep the layers together.
Join the outer nonwoven and barrier film while preserving the intended softness. Review the actual substrates and adhesive pattern together.
Review: layer alignment, bond integrity and softness.01 / DIAPER CONSTRUCTION
A system of bonds.
Working together.
A diaper combines nonwovens, barrier film, absorbent materials and elastics. Each interface has a different job; adhesive selection starts with that job.
Core integrity
Stabilise the absorbent core and its wrap. The bonding approach depends on the fluff/SAP ratio, core architecture and integrity required after wetting.
Elastic attachment
Anchor stretched elastic strands or films at the waist, legs and barrier cuffs. Evaluate creep resistance and holding power as the elastics repeatedly extend and recover.
ADL & layer fixation
Hold the acquisition/distribution layer and adjacent layers in position. The application pattern must support liquid movement through the designed absorbent structure.
Tabs, panels & end seals
Assess frontal-tape anchoring, side-panel assembly, cuff connections and end seals against the materials and forces at each interface.
Specialty functions
Some designs also use hotmelt wetness indicators. These are a separate functional chemistry; suitability and availability need to be established for the specific project.
02 / FEMININE CARE
Stay in place.
Release cleanly.
Positioning adhesive belongs on the garment-facing backsheet and wings. It holds the pad on underwear and is protected by a removable release liner before use.
Balance initial tack and in-use holding power with clean removal from different fabrics. Check for adhesive transfer, fabric damage and liner-release behaviour.
Construction and core adhesives perform separate internal tasks: keeping the absorbent layers assembled and the core stable.
Positioning adhesiveOYTITHERM 2260
03 / WET-WIPE PACKAGING
A secure frame.
Every time it opens.
Hotmelt attaches the rigid plastic flip-top frame to the flexible film pack. The bonded frame stays fixed while the hinged lid opens and closes.
Plastic to flexible film
Evaluate the actual lid resin, film laminate, print or surface treatment and contact area. Adhesion must suit both surfaces.
Controlled application
Apply a consistent adhesive pattern beneath the frame, then position and press it onto the pack. Keep adhesive away from the dispensing opening.
Repeated-use checks
Assess frame peel, repeated opening and closing, pack flexing and compatibility with the wipe lotion. Resealable labels are a different adhesive application.
Lid attachmentOYTITHERM 2240
OYTITHERM / HYGIENE GRADES
The right grade.
For every bonding job.
Explore six hotmelt grades by their intended application and processing characteristics.
6 grades · all applications
OYTITHERM2250
High-tack HMPSA for construction applications, with high initial tack and cohesion.
Spray · slot · roller
Request TDS/SDSOYTITHERM5500
Construction/core hotmelt for the nonwoven industry, with initial tack and a fast build-up of cohesion.
Spray · nozzle · roller
Request TDS/SDSOYTITHERM2214
High-tack HMPSA developed for elastic attachment, with an emphasis on creep resistance.
Spray · slot · roller
Request TDS/SDSOYTITHERM5600
Styrenic-block-copolymer hotmelt for elastic attachment in nonwoven production.
Spray · nozzle · roller
Request TDS/SDSOYTITHERM2260
Positioning HMPSA with balanced tack for the removability of sanitary napkins.
Spray · slot · roller
Request TDS/SDSOYTITHERM2240
High-tack HMPSA developed for bonding rigid lids to wet-wipe packaging, including difficult-to-bond surfaces.
Spray · slot · roller
Request TDS/SDSRequest the current TDS and SDS for grade-specific technical data and handling information. Confirm suitability with your actual materials and process.
FROM SAMPLE TO PRODUCTION
Match the bond.
Verify the result.
Materials & interfaces
Identify every substrate and bond function before selecting an adhesive.
Application window
Match coating pattern, add-on, temperature and open time to the production line.
Finished-article validation
Review bond integrity, peel and creep together with the finished article’s use conditions and required hygiene assessments.
ADHESIVE SOLUTIONS
HIGH PERFORMANCE HOTMELT ADHESIVES
Discuss OYTITHERM hotmelt and HMPSA options for your hygiene construction. Core, elastic, positioning and lid-attachment functions require individual grade selection and trials on the finished article.
Explore OYTITHERMAPPLICATION DEVELOPMENT
Start with your materials.
Share your nonwovens, films, elastics, core design or lid-and-pack samples, together with line speed and application equipment. We can define the relevant bonding and processing checks.
Discuss your applicationLET’S BUILD THE NEXT BOND.
What are
you making?
Tell us about your materials and your production process. Let’s explore the right adhesive together.
Talk to our team info@oyti-adhesives.com+90 226 400 00 27